H4P
Halal for Pharma
Manufacturing, Supply Chain & Logistics

Halal Pharmaceutical Manufacturing Practices (Halal GMP)

By Faiz Azizan (PhD) |
Technical Peer-Review: Verified against JAKIM MS 2424:2019, MPPHM 2020 & PIC/S GMP PE 009-17 by MIHA Certified Lead Auditors.

Halal GMP does not replace GMP. It sits on top of it.

Every GMP control stays. Halal adds origin checks and najs-prevention steps, plus a management system that proves them.

Halal GMP vs standard GMP

What halal adds to GMP
AreaStandard GMPHalal GMP
MaterialsQuality and identityPlus halal source and certificate
EquipmentCleaning validationPlus najs prevention; sertu if contaminated
FacilityContamination controlPlus segregation from non-halal materials
RecordsBatch and quality recordsPlus halal declarations and traceability
PersonnelGMP trainingPlus halal awareness training
ManagementPharmaceutical quality systemPlus halal management system and internal halal audit (MHMS 2020, MS 2424:2019)

Preventing cross-contamination

The main risk is shared equipment and shared space. Prevention comes first, cleansing second.

Use separate lines, tools and storage for halal materials where possible. Where sharing is unavoidable, validate the cleaning method and have the certifier approve it.

Cleansing: sertu

Sertu (also called samak) is the required ritual cleansing for equipment and surfaces touched by severe najs, such as pig, dog and their derivatives. The commonly cited method is seven washes. One of them uses water mixed with clean soil, ideally the first, and the remaining six use clean water. The Shafi’i school treats the first or second wash as acceptable for the soil wash.

A Malaysian religious department guideline, based on JAKIM guidance, includes sections for machinery such as drug-manufacturing equipment, pipes, tanks and floors. It also allows certain confirmed-clean cleaning agents in early washes and permits clay soap as an industrial substitute for soil.

Sertu at a glance (confirm with your certifier)
ItemDetail
When requiredContact with severe najs (najs mughallazah)
Number of washesSeven
Soil washOne wash with water mixed with clean soil, usually the first
Other washesSix with clean water
Industrial substituteClay soap, per a Malaysian religious department guideline
RecordsWho, what, when, method and verification

Control options

Cleansing and control options
OptionAdvantageLimitation
Dedicated halal lineSimplest and lowest riskHigher capital cost
Shared line with validated cleansingFlexible capacityNeeds approval and strict records
Campaign productionHalal batches groupedScheduling constraints

CCP monitoring

Define CCPs such as incoming material check, line clearance and cleansing verification. Monitor and record each.

Example CCPs for a halal tablet line
CCPHazardControlRecord
Incoming materialsUnverified or expired halal documentsCheck certificate and declaration at goods-inGoods-in checklist
Line clearanceResidue of non-halal productDocumented clearance before halal batchLine clearance form
Cleansing verificationIncomplete sertu or cleaningVerification step and sign-offCleansing log
StorageContact with non-halal materialSegregated labelled areaStorage audit

Proving it works

A halal management system is only credible if audited. Run internal halal audits on a schedule, close findings and train staff. As highlighted in the governance guides by Get Halal Malaysia, manufacturers must establish an Internal Halal Committee (IHC), appoint a certified Halal Executive recognized by the JAKIM Halal Professional Board (HPB), and maintain at least two Muslim production operators on active processing lines. Duopharma Biotech has publicly stated that its facilities adhere to MS 2424:2019, which illustrates what certifiers expect of a complete system.

For clause-by-clause standard breakdowns, see JAKIM MS 2424:2019 standard requirements. For storage and distribution integrity, see our guide on halal logistics and warehousing standards. If you operate a toll-manufacturing or shared suite plant, explore our advisory for CDMO shared manufacturing facility solutions and prescription medicines and solid dosages certification.

Facility design principles

Good design removes risk before procedures are needed. These principles are general industry practice, so agree specifics with your certifier.

Design principles for a halal-ready plant
PrinciplePractical meaning
Separate flowsHalal and non-halal materials do not cross paths
Dedicated toolsScoops, containers and change parts are labelled and kept apart
Closed systems where possibleFewer open transfers reduce splash and residue risk
Drainage and washing controlWash water from non-halal areas cannot reach halal areas
Clear signageZones and equipment are visibly marked

A worked example: converting a shared line

Suppose a plant runs one tablet line for both halal and non-halal products, and some products contain porcine-derived material. The conversion usually follows a staged path.

Illustrative steps to run halal batches on a previously shared line (example)
StepActionEvidence
1Identify every product that has touched the line and the najs risk of eachProduct history review
2Decide: dedicate the line, or validate cleansing for shared useRisk decision record
3If cleansing is needed, perform sertu and document each washSertu log signed by trained staff
4Verify the line is clear before the first halal batchLine clearance form
5Run halal batches as a campaign and monitor CCPsBatch halal checklist
6Review whether to dedicate the line permanentlyManagement review minute

A certifier will want to see the decision logic in step 2 and the records in steps 3 and 4. A line with a clean history is far easier to certify than one with unclear history.

Training and culture

Procedures fail when staff do not understand them. Halal training should cover what najs is, why segregation matters, how to log cleansing, and who to tell if a mix-up happens.

Test understanding, record attendance and retrain after any incident. Make reporting safe, because a hidden mix-up is far worse than a reported one.

Change control and audit

Any change to materials, equipment or layout needs halal review before use. Keep the reviewer’s sign-off with the change record.

Internal halal audit checklist (starter list)
AreaCheck
MaterialsEvery material has a valid certificate or declaration on file
EquipmentCleansing logs complete and signed for each shared-use event
ProductionLine clearance done before each halal batch
StorageHalal items segregated and labelled
PeopleTraining records current for all handlers
DocumentsHalal file matches the label and registration
IncidentsAny mix-up logged, investigated and closed

Close every finding with evidence and share the audit results at management review. This is the proof a certifier looks for. Before applying on MYeHALAL, screen all chemical raw materials with our guide to common haram and mashbooh ingredients and review the end-to-end halal pharmaceutical certification audit process.

Educational content only. Follow the certifier’s procedures.

FA

Faiz Azizan (PhD)

SEO Author & Researcher

Work as SEO author & researcher for halalforpharma.com with Google KG. Contact via LinkedIn or web: drfaizazizan.com.

Regulatory References & Sources

Regulations, National Fatwa Council rulings, and NPRA guidelines evolve. Confirm current validity with JAKIM or MNS Modulaz before altering manufacturing batches.

Frequently Asked Questions

How is halal GMP different from standard GMP?

Halal GMP keeps all GMP requirements and adds Shariah controls: verified ingredients, segregation from najs, dedicated or cleansed equipment, halal documentation and a halal management system with internal audit.

What is sertu?

Sertu is the ritual cleansing required after contact with severe najs (najs mughallazah, such as pig-derived material). The commonly cited method is seven washes, one of them with soil-mixed water, usually the first, followed by six with clean water.

Can clay soap replace soil?

A Malaysian religious department guideline permits clay soap (sabun tanah liat) as an industrial substitute for soil. Confirm with your certifier before using it.

Do halal medicines need dedicated production lines?

Dedicated lines are the simplest control. Shared lines are possible only with validated cleansing and a certifier-approved procedure.

What is a CCP in halal manufacturing?

A critical control point is a step where control prevents or removes a halal hazard, such as cross-contact with najs material.

Related Guides & Technical Standards